Sold All Below to Brad Nickerson in 2017
ECU Reflashed by Franco, 1999 XPL with key $800
M&W Ignition Boxes, 2 or 4 stroke $450 each
Novi 46mm A booster carbs, 947 $800
XP and RXP stock ECU's $200
Billet Case Coolers, 951 for new and old cases SOLD ALL
V-force Reeds for 951 $200
Micro Touch Racing Electronics, billet case $250
Micro Touch MT-REV-SD-RAVE 97/98 $125
(for single coil + rev limiter)
Micro Touch Water solenoid control box - 2 each $100/each
Rossier 947 Pipe and manifold, good condition $650
Miller Q Dome head w/ domes $300
947 Factory Carbs $250
Magnesun Watercooled Supercharger for a 951 engine $1800
Rossier New Inventory For Sale, purchased their remaining stock when they closed.
Selling all at one price; make an offer.
XPL Kevlar racing hood, 14 lbs for XPL hulls
$150 Sold Feb 2019
Rossier 50 mm Intakes , new for 947 engine $50 for both
Sold Feb 2019
Novi 46 mm carbs for a 947 with a nitrous activation switch $ 800
Sold Jan 2019
Rossier pipe and exhaust manifold
$ 1000
Manifold is drilled and tapped for EGT's
EGT and water fittings included
Pending sale 5/22
951 stock reeds , good condition
$75.00 for both
3 / 2021 REDUCED TO $50
Center: 148 mm 12 vane stainless Skat Trak pump $ 1200
Parts For Sale
Current items for sale listed first.
Sold items are listed below
Kinsler 50 mm twin throttle bodies for EFI. $1000.00
spacing is 96mm . Could be widened to 132 for a 947
Has EFI pressure sensor and gauge, a $1600 value.
Miller runs 50+ mm TB's on his EFI race boat
SOLD 4/22 going on an EFI XPL 91 mm +2 stroker
Coffman 947 Short neck pipe for GSX
Will also work on XPL at 5 to 7 HP loss over long neck pipe
Also long neck pipe with O2 sensor fitting , see Miller 1105 pictures
Either one $ 1000.00
Sold the long neck pipe 1/2020
Sold short neck one 5/1/20
Bottom: 140 mm Magnum Skat Trak stainless pump , comes with shaped bearing cone , not shown $ 250
SOLD Sept. 2019
R & D Intakes for 947 Engine
with NOS nozzles and oil injection fittings
$175.00
SOLD 2021
Rossier cylinders , with or w/o Miller pistons
Pics & price to come.
High capacity carb Fuel pumps.
$50 for either pair
Rossier big bore impeller recommended by Rossier for his big bore kit
NuJet SD-B6.5L 155 mm
Blades are perfect, Excellent condition
$ 250.00
3-3-21 ERROR
This impeller is 155 mm
Rotax/ Siemens ECU No Key
# 665700 I believe this was purchased from Green Hulk many years ago for my 2007 RXP performance mods
$375
3 / 2021 REDUCED TO $275
Sold Items for reference
Titanium bolt set for 947 / 1050
save half the weight with more strength
Complete bolt set less head studs weighs 2.5 lb. You can't beat the "COOL " factor.
$650 value for $500.00
Have more sizes in stock.
SOLD 2-27-2021
TOP: 148 mm 14 vane set back Skat Trak Stainless pump
Not yet for sale
ALSO COMING, Summer 2022
Crank Works Stroker cranks and rods
1050, 1105 and 1170 crankcases,cranks cylinders and pistons
SEE MILLER SECTION
V Force 3 reed set for a 951
Carbon Fiber reeds Good Condition
Have 3 sets of these
. $140.00 per set
Have Ski Doo ( Rinaldi reed cages for sale, too.
$40 each with Ski Doo reeds , used , good condition.
Ron's Performance Shop